主要产品>法国M.B.tech NC25 PCBA清洗机
 
n

NC25  has been especially developed to clean Waffers and Lead Frames into carrier after reflow. This equipment has been designed to work with liquids using Dr.O.K.Wack Chemical MPC technology. To reach a high level of efficiency the equipment uses a patented filtering system (patent n°98 13981). Depending of the application, it will be possible to use ATRON®, VIGON® or ZESTRON® materials.

Simplicity and Efficiency:

 

·      PCB holder frame with quick locking system or based on wave soldering finger

·      Automatic frame transfer

·      Process managed by PLC with display and soft keyboard,

·      Permanent water conductivity control with alarm on rinsing tank,

·      Residues separated by a patented filtering system,

·      Vacuum drying in aluminum tank with forced convection,

·      Possibility to load up to 5 frames and to collect them on an unloading conveyor.

·      DI water regeneration system included (except coal and mixed bed resin bottles)

Economical:

·      Low cleaning process cost

 

·      Utilization :                         

Low product consumption,

Product permanently recycled,

Robust construction,

Small foot print (1m wide, 1,90 high, 1,40m deep),

Minimal maintenance requirements

 

General Specifications

  • Dimension: Width: 1,00 m; High: 2,10 m; Depth: 1,60 m.
  • Empty weight: around 800 kg
  • Capacity: 80 liters cleaning liquid,

 60 liters water,

 60 liters DI water

  • Electric supply: 380/400 V – 50 Hz – 3 phases + Neutral + Ground.
  • Power: 6000 watts
  • Pressure of using: 5,5 bars, maximum flow rate: 2m3/min, air without oil and water
  • Sound level: under 75 dB.

 Working Principle Diagram:

 

                            

                                      TYPE:NC25

 

   

更多产品信息和TDS索要请和我们随时联系。

 

联系地址:上海市浦东金桥路1398号金台大厦1108室
           电话:021-50759202 50759203 50759204 传真:021-50759205
版权所有©:上海天创机电科技有限公司  2003-2010
E-Mail:Support@sskyt.com
 ICP备案编号:沪ICP备05017373号